This Low speed precise specimen cutting machine is suitable for the precise cutting of various hard materials. It is especially suitable for the precise cutting of all kinds of small metal, non-metal pieces and various electronic components. This machine can be equipped with diamond saw blade and other resin blade so as to meet the demands of cutting of various specimens. Many specimen clamping grippers are equipped with this machine and it can realize the positioning cutting at best angle for the workpieces. It can also realize workpiece processing without being watched. The main shaft features high running speed and the horizontal feeding position of the workpiece being processed can be adjusted precisely. It is the ideal metallography specimen preparing instrument for using in factories, scientific research institutes and laboratories of colleges.

Taking advantage of rolling sheet wheel with high speed, Model BQ-2 Metallography specimen cutting machine can obtain metallography specimen and it can be widely used to cut various metal materials in metallography laboratories. The equipped cooling system can clear up the heat produced during cutting so that it will avoid the metallography structure deforming of specimen because of heating fluence. Besides various metal materials, this machine can also be used to cut other non-metal material such as plastic, rubber hose etc. Technical specification:  Max. cutting diameter: 30mm  Sand wheel specification: 250 x 2 x 32mm  Sand wheel rotating speed: 2800 rpm  Motor: 1.1 KW, 220V 50Hz.  Dimensions: 65 x 45 x 40 cm  Net weight : 60 Kg

This is equipped with big cutting room and movable T-shape work table. Therefore this machine has the ability of cutting rectangle and large specimens. Also the equipped separate type vice is very convenient for operator to clamp various heterotypic work pieces. Technical specifications:  Cutting Speed: 2.25, 3, 4, 5, 7, 9, 12, 15 mm/min  Revolution of abrasive wheel:: 2100rpm  Specifications of abrasive wheel: 350x2.5x32mm  Display: high-resolution negative lattice LCD  Power: three phases, four cables, 440V, 50Hz  Overall dimensions: 930mm x 700mm x 610mm

Dimensions (W x D x H): 1500mm x 2000mm x 2500mm (Approx.) Weight: 900 Kg. a) Sturdy floor model cutter for sectioning metals ceramic and mineral samples b) Cutting capacity up to Ø 180mm c) Spindle speed 2400rpm and cut-off wheel dia 20” d) 15HP, 3 phase motor e) 6” Vice with T slot bed for clamping of components f) Oscillation Shall Be Provided For Smooth Cutting g) Splash proof, corrosion resistant see through hood h) Cooling by three high flow water jets to provide optimum cooling i) Large (150x50mm) drain, re-circulation coolant tank with 50ltr. Capacity j) Fluorescent light in the working area provides safe and clear illumination.

Large viewing window to monitor the cutting operation. Inside chamber is illuminated and see-through hood is provided for monitoring the cutting operation. Coolant circulation is provided with suitable filtering arrangement. Specifications: Cutting speed: Manual Revolution of abrasive wheel: 1440rpm Cut-Off wheel size: 350mm (OD) x 2.5mm (thick) x 31.5mm (ID) Cutting capacity: 110mm Cutting motor power: 3.0 HP Power supply: 440 Volts, 3 Phase, 50Hz Dimensions (W x D x H): 800mm x 1000mm x 1550mm Weight (approx.): 300 Kg.

Dimensions (W x D x H) : 650mm x 800mm x 1450mm Weight : 200 Kg. (approx)

a) Sturdy floor model cutter for sectioning metals ceramic and mineral samples b) Cutting capacity up to 50mm c) Spindle speed 2800rpm and cut-off wheel dia 8” (Max.) d) Cutting motor 2HP e) Self centering Vice with 360° rotation jaw opening 4” f) Splash proof, corrosion resistant with see through hood g) Cooling by high flow water jets to provide optimum cooling h) Fluorescent light in the working area provides safe and clear illumination. i) Coolant Tank capacity is 20 Liters Dimensions (W x D x H) : 600mm x 1000mm x 920mm Weight : 100 Kg. (approx)