Power-to-Gas Energy is the process of converting surplus renewable energy into hydrogen gas by rapid response electrolysis and its subsequent injection into the gas distribution network. Power-to-Gas allows for the storage of significant amounts of energy and the provision of CO2 neutral fuels in the form of the resulting renewable energy gas mix of hydrogen and methane. Most developed counties already own a vast energy storage infrastructure through the pressurisation of existing transmission and distribution infrastructure. This allows it to be recharged without the need of it being discharged first, so when the wind blows, this can be taken and used to top up storage, this is critical for storing renewable energy which is intermittent in its generation. For More Information Please Contact us or call on +91 253 2501600 http://www.crystaltcs.com/hydrogen-generation-systems.php

Liquid Jet Ejectors are specially designed to operate using water, solvent or any other clear liquid and generate vacuum corresponding to the vapor pressure of the liquid. They are very useful for applications when expensive process fluid is to be recovered. They are most suitable for low non-condensable and high condensable loads in applications like distillation and evaporation. External heat exchanger can be provided to maintain liquid temperature in accordance with vacuum requirement. For higher vacuum, liquid jet ejector can be utilized along with a steam jet ejector combination system. The whole system can be supplied as a pre-assembled skid mounted unit for quick installation. Liquid jet ejectors are jet pumps, motivated by a high pressure liquid. They use the kinetic energy of the pressure liquid to entrain gases and vapors, slurries and other liquids or granular solids and then discharge the resultant mixture against a counter pressure. We at Crystal TCS have gained considerable expertise at developing the involved technology and designing these devices to suit the needs of the application. Add to that our experience in the field and we assure that your application will be completely satisfied. For More Information Please Contact us or call on +91 253 2501600 http://www.crystaltcs.com/special-steels-and-exotic-metal-equipment.php

Special Steel and Exotic Metal Equipment are used in the industry for the most demanding operations accompanied by severe operating conditions. Naturally the material of construction for these Equipment plays a pivotal role in their ability to satisfy the applications but equally important is the technology for construction and assembly. This makes it important for the manufacturer to deliver on both fronts that of material quality and manufacturing excellence. • Cost competitive with Carbon Block heat exchangers • Elimination of downtime due to equipment failure • No spare parts to keep in inventory • Superior corrosion resistance • High heat transfer • Fully welded metal design eliminates breakage during handling, installation and operation We can provide you with a long list of references with whom you can discuss the performance of CRYSTALTCS Steel Pickling Heat Exchangers and equipment. Give us a call for our list, or even if you just have a few questions. We’re happy to help. For More Information Please Contact us or call on +91 253 2501600 http://www.crystaltcs.com/special-steels-and-exotic-metal-equipment.php

Vacuum or negative Pressure as it is known, is an important phenomenon which has been put to use across the world for various applications and purposes. Crystal Tcs is a Technology and manufacturing based engineering firm working in the field of Jet pumps. We at Crystal TCS have gained considerable expertise at developing the involved technology and designing these devices to suit the needs of the application. Add to that our experience in the field and we assure that your application will be completely satisfied. Jet pumps, also referred to as ejectors, are devices for the conveyance, compression or mixing of gases, vapors, liquids or solids and for the production of vacuum in which a gaseous or liquid medium serves as the motive force.We are manufacturing of vacuum systems in ejectors and jet pumps there are some types as following: Process gas driven Vacuum Ejectors: The manufacturing of process gas driven Ejectors in different metals such as Carbon Steel, Stainless Steel, Special Steels and Exotic Metals and in non-metals like FRP (Fibre Reinforced Plastic), PVDF (Polyvinylidene Flouride) and Graphite. For More Information Please Contact us or call on +91 253 2501600 http://www.crystaltcs.com/hydrogen-generation-systems.php

Compressed air driven vacuum ejectors find a wide use in the industry due to the easy availability of Compressed air which acts as a motive medium in these ejectors. These devices are extremely reliant, and highly compact in size. Compressed air over a large range of pressure and temperature. In fact higher the available compressed air temperature lower will be the flow requirement, thus eliminating the need for an after cooler in a compressed air system. Our crystal Tcs is an technology based engineering firm working in the field of Hydrogen Generation System. we have more than 30years experience in the field in Capital Equipment and Engineering. We manufacture Ejectors in different materials such as Carbon Steel, Stainless Steel and Hastelloys. The material selection is done after making careful assessments and taking due considerations of the process mediums. If you are interested our product and looking for atmospheric air ejectors then please contact us. For More Information Please Contact us or call on +91 253 2501600 http://www.crystaltcs.com/compressed-air-driven-vacuum-ejector.php

Our crystal Tcs is an technology based engineering firm working in the field of Hydrogen Generation System. we have more than 30years experience in the field in Capital Equipment and Engineering. Crystal TCS deal in Hydrogen generation systems based on the electrolysis of Water. The heart of the system is the electrolyzed unit which decomposes water into oxygen and hydrogen. The separated hydrogen is collected and treated to obtain pure hydrogen gas (>99.7%) as the output. Our systems are available up to a capacity of 1500 Nm3/hr in a single unit. Higher capacities can be designed upon request. Our company has committed itself to strive continuously for technological excellence and puts a great emphasis on delivering quality products and services. For more info please contact us: For More Information Please Contact us or call on +91 253 2501600 http://www.crystaltcs.com/vacuum-systems.php

Tantalum Heat Exchanger or Tantalum process equipment for any chemical application where corrosion is a factor and the long-term benefits of reduced downtime, increased life expectancy a nd profitability are important. Life Cycle Benefits of Tantalum Heat Exchangers: Tantalum Heat Exchanger Cost competitive with PTFE, impregnated graphite and ceramic Heat Exchangers Elimination of downtime due to equipment failure Require no spare parts to keep in inventory Provide superior corrosion resistance Offer high heat transfer “U” values Accommodate high steam pressures to reduce required surface area Fully welded metal designs eliminate breakage during handling, installation and operation Eliminate cross contamination of process fluids For More Information Please Contact us or call on +91 253 2501600 For More Information Please Contact us or call on +91 253 2501600 http://www.crystaltcs.com/special-steels-and-exotic-metal-equipment.php

The maximum obtainable vacuum by a Liquid ring vacuum pumps is dependent on the temperature and vapour pressure of the sealing fluid. Atmospheric air ejectors use freely available air from atmosphere as their energy source which eliminates any need for gas supply systems or compressors. Atmospheric air ejector-LRVP combination system can be effectively used to obtain vacuum upto 5 torr (abs) or 6 mbar(abs). The Combination systems need a higher capacity vacuum pump in order to accommodate the atmospheric air along with the suction media. Our Crystal TCS supply entire package comprising of atmospheric jet ejectors backed up by a Liquid ring vacuum pump and can also supply a standalone atmospheric air ejector for supplementing an existing Liquid ring vacuum pump to enhance the obtainable vacuum. we have 30years experience in the field in Capital Equipment and Engineering. If you are interested our product and looking for atmospheric air ejectors then please contact us. For More Information Please Contact us or call on +91 253 2501600 http://www.crystaltcs.com/vacuum-systems.php