We deal in Hydrogen generation systems based on the electrolysis of Water. The heart of the system is the electrolyser unit which decomposes water into oxygen and hydrogen. The separated hydrogen is collected and treated to obtain pure hydrogen gas (>99.7%) as the output. Our systems are available up to a capacity of 1500 Nm3/hr. in a single unit. Higher capacities can be designed upon request. Salient Features of our Hydrogen generation systems: The unit generates Hydrogen at pressure up to 30 bar, eliminating the need of a separate gas compressor for boosting the pressure. Robust and Skid Mounted construction enables ease of handling and mounting. The units can also be installed inside a single container, eliminating the need for separate unit housing facility. Short Cold Start times enable to maximize process output. High reliability combined with High efficiency makes the System cost-effective over its life cycle. For More Information Please Contact us or call on +91 253 2501600 / 9921391762 http://www.crystaltcs.com/hydrogen-generation-systems.php

Special Steel and Exotic Metal Equipment are used in the industry for the most demanding operations accompanied by severe operating conditions. Naturally the material of construction for these Equipment plays a pivotal role in their ability to satisfy the applications but equally important is the technology for construction and assembly. This makes it important for the manufacturer to deliver on both fronts that of material quality and manufacturing excellence. Selecting and evaluating such manufacturers is our forte and we choose to represent the best in these field. We deal in equipment manufactured out of a vast range of metals ranging from special Steel such as Duplex, Super Duplex to Exotic metals such as Tantalum, Titanium, Inconel, Hastelloys, Molybdenum, Nickel, Monel and Zirconium. For More Information Please Contact us or call on +91 253 2501600 / 9921391762 http://www.crystaltcs.com/special-steels-and-exotic-metal-equipment.php

Process Gas Ejectors can be designed to work with any gas or vapour as its motive energy source. Running an ejector with available high pressure vapour/gas helps to eliminate the costs required for creating a separate infrastructure for the Ejector motive fluid source such as Air or Steam. Contamination of the process media can be avoided by using the same media under high pressure as the motive energy source. Traditionally the low pressure waste gas in refineries used to be let off to the atmosphere by burning it in the flare stacks. But nowadays in order to boost production and to comply with the environmental regulations, the waste gas is reintroduced in the process or used as fuel in the plant. Flare gas recovery systems work by compressing the waste gas and then reintroduce it in the process. Process gas driven vacuum ejector are used to compress the waste gas in these systems when High Pressure gas is available in the plant. For More Information Please Contact us or call on +91 253 2501600 / 9921391762 http://www.crystaltcs.com/process-gas-driven-vacuum-ejectors.php

The high corrosion resistance of Exotic metals and Special Steel combined with their manufacturing friendly properties make them ideally suitable for use in Heat exchangers. We deal in various type of Heat Exchangers such as Shell and tube Heat Exchangers, Bayonet Type Heat Exchangers, Hairpin Exchangers. Pickling Heat Exchangers Our Heat Exchangers are used in the Chemical and process Industry and have ensured a long and stress free operation for our clients. We also supply custom made Heating / Cooling Coils to satisfy small heat duties and tank Heating Applications. Tantalum Heat Exchangers are now emerging as a fulfilling solution towards the needs of the pickling process. Tantalum’s robust resistance to HCL and H2SO4 corrosion along with its ability to withstand high temperatures in continuous operation has minimized downtime and nullified stoppages in pickling lines due to Heat exchanger problems. These Heat exchangers are Shell and tube Type and the use of Carbon Steel for shell material and FRP chambers for Acid Inlet and Outlet has made Tantalum Heat exchangers a cost- effective solution for pickling. Special Steels and Exotic Metal Equipment For More Information Please Contact us or call on +91 253 2501600 / 9921391762 http://www.crystaltcs.com/special-steel-and-exotic-metal-heat-exchangers.php

A reliable supply of process gases plays a vital role in most industries. Currently, these gases are mainly supplied by electrolysis or road transportation of compressed or liquefied gas. Crystaltcs offers small scale on-site hydrogen generation systems ranging from 5 Nm3/h up to 100 Nm3/h. This makes them highly suitable to be installed at industrial sites and hydrogen filling stations We deal in Hydrogen generation systems based on the electrolysis of Water. The heart of the system is the electrolyser unit which decomposes water into oxygen and hydrogen. The separated hydrogen is collected and treated to obtain pure hydrogen gas (>99.7%) as the output. Our systems are available upto a capacity of 1500 Nm3/hr in a single unit. Higher capacities can be designed upon request. The unit generates Hydrogen at pressure upto 30 bar, eliminating the need of a separate gas compressor for boosting the pressure. High reliability combined with High efficiency makes the System cost-effective over its life cycle. For More Information Please Contact us or call on +91 253 2501600 http://www.crystaltcs.com/hydrogen-generation-systems.php

The useful range of a liquid ring vacuum pump may be extended using an Atmospheric Air Ejector on the suction flange. It acts as an extra pumping stage. As the name implies, the motive for this ejector is air at atmospheric pressure. While the suction pressure of the liquid ring vacuum pump is in the 50-75 torr range, the ejector can pull the process down to the 5-10 torr range. Crystaltcs manufactures a comprehensive range of Atmospheric Air Jet Ejectors used to extend the operating range of Liquid Ring Vacuum Pumps. In operation an Atmospheric Air Jet Ejector uses the energy available from the expansion of atmospheric air to the Liquid Ring Pump inlet pressure to drive the Ejector. Atmospheric air enters the Ejector and passes through the nozzle where the pressure energy is converted into kinetic energy. On leaving the nozzle at high velocity a region of low pressure is created in the suction chamber which entrains the process fluid. The two streams then combine within the throat of the Ejector before being decelerated in the outlet cone to recover pressure to suit the Liquid Ring Pump inlet capability. For More Information Please Contact us or call on +91 253 2501600 http://www.crystaltcs.com/atmospheric-air-ejector.php

A Tantalum Column can be the most cost-effective solution to corrosion over the entire life cycle of the equipment. Properly maintained, Crystaltcs Tantalum Columns can operate for decades with little to no downtime. Tantalum Columns can: • Deliver many years of economical service life • Eliminate expensive process downtime due to equipment failure • Provide outstanding corrosion resistance • Provide excellent stress cracking resistance Vessels, columns and associated accessories may also be manufactured from tantalum, plated with tantalum and even explosion bonded with tantalum. Inform us of your needs, so that we can develop the appropriate solution together with you. We deal in equipment manufactured out of a vast range of metals ranging from special Steel such as Duplex, Super Duplex to Exotic metals such as Tantalum, Titanium, Inconel, Hastelloys, Molybdenum, Nickel, Monel and Zirconium. For More Information Please Contact us or call on +91 253 2501600 http://www.crystaltcs.com/special-steels-and-exotic-metal-equipment.php

Tantalum Bayonet Heaters used in evaporative processes, this type of heat exchanger is also available for vertical or horizontal installation. The heat exchangers are installed in evaporators, which may be constructed from glass or glass lined steel. For Tantalum Equipment and Components, we represent M/s Tantec GmBH, Germany exclusively for India, South-East Asia and the Middle-East Tantec GmBH is a company based in Germany and operates exclusively in the field of Tantalum Equipment. We deal in equipment manufactured out of a vast range of metals ranging from special Steel such as Duplex, Super Duplex to Exotic metals such as Tantalum, Titanium, Inconel, Hastelloys, Molybdenum, Nickel, Monel and Zirconium. For More Information Please Contact us or call on +91 253 2501600 http://www.crystaltcs.com/special-steels-and-exotic-metal-equipment.php

Special Steel and Exotic Metal Equipment are used in the industry for the most demanding operations accompanied by severe operating conditions. Naturally the material of construction for these Equipment plays a pivotal role in their ability to satisfy the applications but equally important is the technology for construction and assembly. This makes it important for the manufacturer to deliver on both fronts that of material quality and manufacturing excellence. Selecting and evaluating such manufacturers is our forte and we choose to represent the best in these field. We deal in equipment manufactured out of a vast range of metals ranging from special Steel such as Duplex, Super Duplex to Exotic metals such as Tantalum, Titanium, Inconel, Hastelloys, Molybdenum, Nickel, Monel and Zirconium. For More Information Please Contact us or call on +91 253 2501600 http://www.crystaltcs.com/special-steels-and-exotic-metal-equipment.php

Vacuum ejectors can be designed to work with any gas or vapour as its motive energy source. Running an ejector with available high pressure vapour/gas helps to eliminate the costs required for creating a separate infrastructure for the Ejector motive fluid source such as Air or Steam. Contamination of the process media can be avoided by using the same media under high pressure as the motive energy source. We manufacture Ejectors in different metals such as Carbon Steel, Stainless Steel, Special Steels and Exotic Metals and in non-metals like FRP (Fibre Reinforced Plastic), PVDF and Graphite. The material selection is done after making careful assessments and taking due considerations of the process mediums. For More Information Please Contact us or call on +91 253 2501600 http://www.crystaltcs.com/special-steels-and-exotic-metal-equipment.php