Hexagonal Boron Nitride Boron nitride is a white solid material in the as produced hot pressed form. It is a low porosity solid. It is easily machined into complex shapes using standard carbide tooling. The material is anisotropic in its electrical and mechanical properties due to the platy hexagonal crystals and their orientation during the hot press consolidation. Key Properties High thermal conductivity, Low thermal expansion, Good thermal shock resistance, High electrical resistance, Low dielectric constant and loss tangent, Microwave transparency, on toxic, Easily machined — non abrasive and lubricious, Chemically inert, Not wet by most molten metals. Use Structural material in atomic reactor, spout of plane, rocket engine, High temperature solid lubricant and many kinds of parting agent of precision molding products, High temperature resistant, anticorrosive boron nitride and boron nitride compound ceramics, Synthesize cubic boron nitride, Compression resistant and high temperature resistant lubricating grease, All kinds of high temperature resistant, anticorrosion coating, Insulator for high pressure high frequency electricity and plasma arc, Ox dating additive for refractory materials.

Product Name: Glycerol Monoglyceride（GMS） Product type: food emulsifier Product instruction: Glycerol monostearate (hereinafter referred to monoglyceride)is a kindof oil chemical product. It’s widely used in food and daily chemical industry.It alsocan be used as lubricant agent in producing PVC transparent particles, as emulsifier for Cream Cosmetics, as anti fogging agent in producing agricultural plastic films and as antistatic agent in producing packaging films. Packaging:paper-plastics compound bag, 25g/per

Characters: Ivory powder or granular solid, it can be dispersed into the hot water, can be dissolved into the ethanol and hot grease. It is a non-ionic emulsifier， HLB value is 3.8-5.3. Character: 1. It is good for form stable emulsion to avoid delamination and deposit of food and beverage by adding emulsifier. And it could improve quality of product and prolong shelf life of product 2. It can form the complex with the protein and starch, prevent the starch from aging, used in bread, cake for keeping the shelf life. 3. It can be arranged in order on surface of grease. This is helpful to control and stabilize crystallization of grease. Especially in production of margarine, it can improve plasticity and malleability of product to avoid delamination of the oil and water. Usage: (1) It can be directly mixed well with flour for use. (2) Put this product into warm water at about 70℃ with 1:6 to get paste shaped substance, then for further processing.

JRD-450 is a high fatty acid sodium soap, for used in wet drawing (water tank drawing), which adjust the lubricant concentration from 0.5% to 0.6%, according to the wire drawing conditions, adjust the level of concentration. For the first time formulated 60-70 ℃ hot water available, as per 1:8, after stirring paste, pour into tank or lubricating fluid circulating pool, the dry powder can be added directly into the tank later. It may be foaming when drawing started, but after using the 1-2 times, the foam will disappear and form into a certain viscosity lubricating fluid. When the lubricant is not be used in the water tank for long time, due to the growth of anaerobic bacteria, the lubricating fluid may turn black and stank, then you can run the machine for times, after aeration, color and odor disappears, it would not affect the use of lubricating fluid. Light yellow coating on the wire surface is the perfect state when water tank drawing, it is good for the mold and can prolong it service life, improve production efficiency. If scratches appeared on the surface of the wire, you need to check the concentration of lubricant and mold conditions.